usa/canada: toll free: europe : (315) 432-8909 (800) 544-2414 +44 2392-232392 model G150N50W4E features: ? rohs compliant ? 150 watts ? dc ? 3.0 ghz ? aln ceramic ? non-nichrome resistive element ? low vswr ? 100% tested flange mount termination description the G150N50W4E is high performance aluminum nitride (aln) flange mount termination intended as a cost competitive alternative to beryllium oxide (beo). the termination is well suited to all cellular frequency bands such as; amps, gsm, dcs, pcs, phs and umts. the high power handling makes the part ideal for terminating circulators and for use in power combiners. the termination is also rohs compliant! general specifications resistive element thick film substrate aln ceramic mounting flange nickel plated copper operating temperature -50 to +150 c (see de rating chart) tolerance is all dimensions in inches. electrical specifications resistance value: 50 ohms, 2% power: 150 watts frequency range: dc ? 3.0 ghz return loss 25db dc ? 2.0 ghz 20db dc ? 3.0 ghz specification based on unit properly insta lled using suggested mounting instructions and a 50 ohm nominal impedance. specifications subject to change. outline drawing unless otherwise specified dimensions are in inches 1 of 2 150 watts, 50
usa/canada: toll free: europe: (315) 432-8909 (800) 544-2414 +44 2392-232392 model G150N50W4E 0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 f [ ghz ] -50.00 -45.00 -40.00 -35.00 -30.00 -25.00 -20.00 -15.00 -10.00 -5.00 0.00 return loss (db) 2.00 1.00 0.50 1.00 -1.00 0.50 -0.50 0.20 -0.20 0.00 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 -170 -160 -150 -140 -130 -120 -110 -100 -90 -80 -70 -60 -50 -40 -30 -20 -10 power de-rating: mounting footprint and procedure: *actual performance could be limited by the solder properties of the application 2 of 2 G150N50W4E G150N50W4E typical performance:
|
